Medium
PK 19.001 SLD 5
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 19.001 SLD 5
PK 19.001 SLD 5
SOLID, SIMPLE AND AFFORDABLE
- Additional applications with Single Link Plus
- Higher payloads due to intelligent lightweight design
- Maximum reliability due to PALTRONIC
- High degree of user-friendliness thanks to optional radio remote control
- More lifting power due to A-HPLS
Images & Videos
HPSC-Plus LOAD
PALFINGER has further developed the proved stability system HPSC and offers application oriented additional functions in a modular system. One of the modules of this HPSC-Plus concept is HPSC-Plus LOAD. It reacts to the loading condition of the truck and calculates on the basis of the inclination the maximum load limit suitable for the respective situation.
Max. lifting moment | 18.5 mt |
Max. lifting capacity | 6200 kg |
Max. hydraulic outreach | 14.8 m |
Max. manual outreach | 19.0 m |
Slewing angle | 420° |
Slewing torque | 2.0 mt |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.83 m |
Width folded | 2.55 m |
Max. operating pressure | 360 bar |
Pump capacity | 60 - 80 l/min |
Dead weight (std) | 1700 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
18.5 | 6.1 | 420 | 2.0 | 36.0 | 60-80 | 1700 | 2250 | 2550 | 825 | |
18.1 | 8.2 | 420 | 2.0 | 36.0 | 60-80 | 1855 | 2250 | 2550 | 825 | |
17.7 | 10.4 | 420 | 2.0 | 36.0 | 60-80 | 1990 | 2250 | 2550 | 825 | |
17.3 | 12.6 | 420 | 2.0 | 36.0 | 60-80 | 2105 | 2250 | 2550 | 895 | |
17.0 | 14.8 | 420 | 2.0 | 36.0 | 60-80 | 2205 | 2250 | 2550 | 895 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
Download Brochure for PK 17.001 SLD 1 | PK 18.001 SLD 3 | PK 17.001 SLD 3 | PK 19.001 SLD 5
We will be happy to support you with further information and will contact you shortly.
Best regards,
Your PALFINGER Team
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?