Heavy

PK 135.002 TEC 7

  1. Go back
  2. Home
  3. Products
  4. PK 135.002 TEC 7

PK 135.002 TEC 7

Loader Crane
  • Gross vehicle weight of 32 t – fully equipped with 2500 to 3000 kg payload capacity (four-axle truck)
  • Gross vehicle weight of 40 t – fully equipped with 8000 kg payload capacity (five-axle truck)
  • High mobility due to the mounting on standard truck chassis
  • Very stiff and light boom system thanks to P-Profile
  • Additional applications with Power Link Plus
  • More efficiency with fly-jib due to DPS Plus and DPS-C
  • Maximum utilisation of the working range thanks to extended HPSC
  • Increased comfort and safety due to Soft Stop
  • Practical and attractive due to Functional Design
Downloads Technical Data

P-Profile

The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.

Details

P-Fold

P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.

Details
Max. lifting moment 109.3 mt
Max. lifting capacity 30000 kg
Max. hydraulic outreach 21.9 m
Slewing angle ∞
Slewing torque with 2 gears 10.6 mt
Stabilizer spread (std) 10.0 m
Fitting space required (std) 2.55 m
Max. operating pressure 385 bar
Pump capacity 2x 100 - 130 l/min
Dead weight (std) 10170 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
105.0 10.8 ∞ 10.6 38.5 2x 100 - 130 10170 2600 2550 2450
101.6 15.0 ∞ 10.6 38.5 2x 100 - 130 10930 2600 2550 2540
100.7 17.2 ∞ 10.6 38.5 2x 100 - 130 11250 2600 2550 2600
99.0 19.6 ∞ 10.6 38.5 2x 100 - 130 11530 2600 2550 2600
99.2 22.0 ∞ 10.6 38.5 2x 100 - 130 11780 2600 2550 2600

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

CRANE TOOLS

18,4 MB Download

PK 1350 TEC

0,71 MB Download