Medium
PK 250 TEC
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 250 TEC
PK 250 TEC
- More intelligent operation with PALTRONIC 180 control electronics
- Extra smooth control thanks to LX-6 control valve
- Very stiff and light boom system thanks to P-Profile
- More efficient and faster due to continuous slewing system
- High user friendliness due to in-house developed radio remote control PALcom P7
- Maximum utilisation of the working range thanks to extended HPSC
- More lifting power due to S-HPLS
- Practical and attractive due to Functional Design
Images & Videos
P-Profile
The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.
P-Fold
P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.
Max. lifting moment | 23.5 mt |
Max. lifting capacity | 7100 kg |
Max. hydraulic outreach | 20.0 m |
Slewing angle | ∞ |
Slewing torque with 1 gear | 2.5 mt |
Stabilizer spread (std) | 5.6 m |
Fitting space required (std) | 1.05 m |
Width folded | 2.55 m |
Max. operating pressure | 385 bar |
Pump capacity | 80 - 100 l/min |
Dead weight (std) | 2525 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
22.8 | 8.4 | ∞ | 2.5 | 38.5 | 80-100 | 2570 | 2380 | 2550 | 1050 | |
22.4 | 10.6 | ∞ | 2.5 | 38.5 | 80-100 | 2720 | 2380 | 2550 | 1050 | |
21.9 | 13.0 | ∞ | 2.5 | 38.5 | 80-100 | 2850 | 2380 | 2550 | 1050 | |
21.4 | 15.3 | ∞ | 2.5 | 38.5 | 80-100 | 3000 | 2380 | 2550 | 1050 | |
21.0 | 17.6 | ∞ | 2.5 | 38.5 | 80-100 | 3130 | 2380 | 2550 | 1050 | |
20.6 | 20.0 | ∞ | 2.5 | 38.5 | 80-100 | 3250 | 2380 | 2550 | 1110 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?