![](https://assets.palfinger.com/cache-buster-1654315336/importdata/product-data/loader-cranes/images/loader-cranes/PK%2011.001%20SLD%201%20S106-EK-B/image-thumb__10418__hero-img/pk-11.001-sld1-title-1.jpg)
Medium
PK 11.001 SLD 1
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 11.001 SLD 1
PK 11.001 SLD 1
SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING
- More power on the hook due to Single Link
- Higher payloads due to intelligent lightweight design
- Perfect appearance and the highest value retention due to coating technology
![](https://assets.palfinger.com/cache-buster-1601458159/importdata/product-data/loader-cranes/highlights/image-thumb__7597__highlight-slider-img/return-oil-utilisation.jpg)
![](https://assets.palfinger.com/cache-buster-1601465321/importdata/product-data/loader-cranes/highlights/image-thumb__7695__highlight-slider-img/single-link.jpg)
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link
The knuckle joint significantly improves the crane’s motion geometry.
Max. lifting moment | 10.3 mt |
Max. lifting capacity | 5700 kg |
Max. hydraulic outreach | 12.0 m |
Max. manual outreach | 15.9 m |
Slewing angle | 400° |
Slewing torque | 1.3 mt |
Fitting space required (std) | 1.30 m |
Width folded | 2.32 m |
Max. operating pressure | 330 bar |
Pump capacity | 30 - 45 l/min |
Dead weight (std) | 1140 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
|
|
|
|
|
|
|
|
|
|
|
---|---|---|---|---|---|---|---|---|---|---|
Std | 10.3 | 5.8 | 400 | 1.3 | 33.0 | 30-45 | 1140 | 2110 | 2400 | 720 |
A | 10.0 | 7.8 | 400 | 1.3 | 33.0 | 30-45 | 1250 | 2110 | 2400 | 720 |
B | 9.7 | 9.9 | 400 | 1.3 | 33.0 | 30-45 | 1350 | 2110 | 2400 | 720 |
C | 9.5 | 12.0 | 400 | 1.3 | 33.0 | 30-45 | 1450 | 2110 | 2400 | 720 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
![](https://assets.palfinger.com/cache-buster-1502113691/importdata/product-data/loader-cranes/images/loader-cranes/PK%2011.001%20SLD%201%20S106-EK-B/pk%2011.001%20sld1_armdrawing.jpg)
Brochures
You are currently on the PALFINGER Australia page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?