![](https://assets.palfinger.com/cache-buster-1654264707/importdata/product-data/pna/knuckle-boom-cranes/images/pk-11001-sld1/image-thumb__16320__hero-img/pk-11001-sld1-title.jpg)
Knuckle Boom
PK 11.001 SLD 1
- Go back
- Home
- Products
- Knuckle Boom Cranes
- Models
- PK 11.001 SLD 1
PK 11.001 SLD 1
SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING
- More power on the hook due to Single Link
- Higher payloads due to intelligent lightweight design
- Perfect appearance and the highest value retention due to coating technology
![](https://assets.palfinger.com/cache-buster-1601458159/importdata/product-data/loader-cranes/highlights/image-thumb__7597__highlight-slider-img/return-oil-utilisation.jpg)
![](https://assets.palfinger.com/cache-buster-1601465321/importdata/product-data/loader-cranes/highlights/image-thumb__7695__highlight-slider-img/single-link.jpg)
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link
The knuckle joint significantly improves the crane’s motion geometry.
- Technical data U.S. Units
- Technical Data Metric
- Lifting Capacities U.S. Units
- Lifting Capacities Metric
Max. lifting moment | 74780.0 ft_lbs |
Max. lifting capacity | 12570 lb |
Max. hydraulic outreach | 39' 6'' |
Max. manual outreach | 53' |
Slewing angle | 400° |
Slewing torque | 9370.0 ft_lbs |
Stabilizer spread (std) | 16' |
Fitting space required (std) | 2' 4'' |
Width folded | 7' 7'' |
Max. operating pressure | 4785 psi |
Pump capacity | 7.9 - 11.9 gpm |
Dead weight (std) | 2510 lbs |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Max. lifting moment | 10.3 mt |
Max. lifting capacity | 5700 kg |
Max. hydraulic outreach | 12.0 m |
Max. manual outreach | 15.9 m |
Slewing angle | 400° |
Slewing torque | 1.3 mt |
Fitting space required (std) | 1.30 m |
Width folded | 2.32 m |
Max. operating pressure | 330 bar |
Pump capacity | 30 - 45 l/min |
Dead weight (std) | 1140 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
|
|
|
|
|
|
|
|
Crane Width (inch) |
|
|
---|---|---|---|---|---|---|---|---|---|---|
Std | 74521.0 | - | 400 | 9370 | 4785.0 | 7.9 - 11.9 | 2510 | 83.07 | 94.49 | 27.56 |
A | 72350.0 | 40' | 400 | 9370 | 4785.0 | 7.9 - 11.9 | 2760 | 83.07 | 94.49 | 27.56 |
B | 69456.0 | 46' | 400 | 9370 | 4785.0 | 7.9 - 11.9 | 2980 | 83.07 | 94.49 | 27.56 |
C | 67286.0 | 53' | 400 | 9370 | 4785.0 | 7.9 - 11.9 | 3200 | 83.07 | 94.49 | 27.56 |
|
|
|
|
|
|
|
|
|
|
|
---|---|---|---|---|---|---|---|---|---|---|
Std | 10.3 | 5.8 | 400 | 1.3 | 33.0 | 30-45 | 1140 | 2110 | 2400 | 720 |
A | 10.0 | 7.8 | 400 | 1.3 | 33.0 | 30-45 | 1250 | 2110 | 2400 | 720 |
B | 9.7 | 9.9 | 400 | 1.3 | 33.0 | 30-45 | 1350 | 2110 | 2400 | 720 |
C | 9.5 | 12.0 | 400 | 1.3 | 33.0 | 30-45 | 1450 | 2110 | 2400 | 720 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
![](https://assets.palfinger.com/cache-buster-1502113691/importdata/product-data/loader-cranes/images/loader-cranes/PK%2011.001%20SLD%201%20S106-EK-B/pk%2011.001%20sld1_armdrawing.jpg)
Brochures
You are currently on the PALFINGER Canada page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?