Medium

PK 12502 SH High Performance

Loader Crane

Loads can be moved more precisely due to the standard Soft Stop

Maximum precision and safety due to optional AOS
High value retention thanks to coating technology
More lifting power due to S-HPLS
Additional applications with Power Link Plus
Increased comfort and safety due to Soft Stop

Downloads Technical Data

Perfection in Action

Images & Videos

Folding Assist

Efficient and Safe – The new FOLDING ASSIST function for your LOADER crane

Save time and minimize the risk of damage: With the new FOLDING ASSIST function, you can semi-automatically find the exact position for folding your loader crane. The assistance mode guides you precisely to the correct slewing position, from where you can manually fold the loader crane safely and quickly. No more lengthy searching –
for greater efficiency and safety in every operation.

Enable notification

Technical data
Lifting capacities

Max. lifting moment	11.4 mt
Max. hydraulic outreach	14.1 m
Max. manual outreach	16.1 m
Slewing angle	400°
Slewing torque	1.3 mt
Stabilizer spread (std)	3.2 m
Fitting space required (std)	0.70 m
Width folded	2.38 m
Max. operating pressure	365 bar
Pump capacity	45 - 60 l/min
Dead weight (std)	1160 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

	Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
Std	11.4	5.8	400	1.3	36.5	45 -60	1160	2150	2295	700
A	11.0	7.7	400	1.3	36.5	45-60	1160	2150	2295	700
B	10.7	9.9	400	1.3	36.5	45-60	1160	2150	2295	700
C	10.5	12.0	400	1.3	36.5	45-60	1160	2150	2295	700
D	10.2	14.1	400	1.3	36.5	45-60	1160	2150	2295	700

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.