Heavy
PK 165.002 TEC 7
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 165.002 TEC 7
PK 165.002 TEC 7
Lightweight design meets high-tech control system
- Very stiff and light boom system thanks to P-Profile
- Additional applications thanks to Power Link Plus
- Maximum reliability due to PAL 150
- More lifting power due to S-HPLS
- High degree of user-friendliness thanks to PALcom P7
- Increased comfort and safety due to Soft Stop
Images & Videos
P-Profile
The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.
Continuous Slewing System
The PALFINGER Continuous Slewing Mechanism permits an unrestricted radius of action. The crane is rotated or 'slewed' using a gear box and hydraulic motor instead of a rack and pinion system. All endless slewing mechanisms come as standard with a high quality roller ball bearing.
Power Link Plus
The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.
Soft Stop
The Soft Stop function is an electronic limit position damper. It causes gentle braking of all crane movements before the limit position is reached. Hence, jerky movements and load impacts can be avoided. The crane can be operated more gently and precisely.
RTC
The new RTC (Rope Tension Control) system is an automatic rope tensioning device that helps to fold and unfold the crane. This is a further innovation from PALFINGER that will significantly shorten the set-up time.
P-Fold
P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.
Max. lifting moment | 124.8 mt |
Max. lifting capacity | 32000 kg |
Max. hydraulic outreach | 21.0 m |
Max. outreach (with fly jib) | 36.1 m |
Slewing angle | ∞ |
Slewing torque with 2 gears | 12.0 mt |
Stabilizer spread (std) | 10.0 m |
Max. operating pressure | 385 bar |
Pump capacity | 2 x 100 - 120 l/min |
Dead weight (std) | 11510 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
121.6 | 10.2 | ∞ | 12.0 | 38.5 | 2x100-120 | 11510 | 2680 | 2550 | 2700 | |
117.0 | 14.2 | ∞ | 12.0 | 38.5 | 2x100-120 | 12230 | 2680 | 2550 | 2700 | |
115.9 | 16.4 | ∞ | 12.0 | 38.5 | 2x100-120 | 12660 | 2680 | 2550 | 2700 | |
115.2 | 18.6 | ∞ | 12.0 | 38.5 | 2x100-120 | 12960 | 2680 | 2550 | 2850 | |
114.6 | 21.0 | ∞ | 12.0 | 38.5 | 2x100-120 | 13200 | 2680 | 2550 | 2850 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?