
Knuckle Boom Crane
PK 5.501 SLD 5
PK 5.501 SLD 5
THE CRANE GEOMETRY IS SIGNIFICANTLY IMPROVED DUE TO THE LINKAGE SYSTEM
- More power in the hook due to Single Link
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
- Higher payloads due to intelligent lightweight design

High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
- Technical data U.S. Units
- Technical Data Metric
- Lifting Capacities U.S. Units
- Lifting Capacities Metric
Max. lifting moment | 36.7 ft lbs |
Max. lifting capacity | 7300 lb |
Max. hydraulic outreach | 36' 5'' |
Max. manual outreach | 41' 8'' |
Slewing angle | 400° |
Slewing torque | 4350.0 ft lbs |
Stabilizer spread (std) | 2.9 m |
Width folded | 6' 11'' |
Max. operating pressure | 5.22 psi |
Pump capacity | 5.3 - 7.9 gpm |
Dead weight (std) | 1.6 lbs |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Max. lifting moment | 5.1 mt |
Max. lifting capacity | 3300 kg |
Max. hydraulic outreach | 11.1 m |
Max. manual outreach | 12.7 m |
Slewing angle | 400° |
Slewing torque | 0.6 mt |
Stabilizer spread (std) | 2.9 m |
Fitting space required (std) | 0.66 m |
Width folded | 2.10 m |
Max. operating pressure | 360 bar |
Pump capacity | 20 - 30 l/min |
Dead weight (std) | 750 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
(ft_lbs) |
|
(°) |
(ft_lbs) |
(psi) |
(gpm) |
(lbs) |
(inch) |
Crane Width (inch) |
(inch) |
|
---|---|---|---|---|---|---|---|---|---|---|
Std | - | - | 400 | - | - | 5.3-7.9 | - | - | - | - |
A | - | - | 400 | - | - | 5.3-7.9 | - | - | - | - |
B | - | - | 400 | - | - | 5.3-7.9 | - | - | - | - |
C | - | - | 400 | - | - | 5.3-7.9 | - | - | - | - |
(mt) |
(m) |
(°) |
(mt) |
(MPa) |
(l/min) |
(kg) |
(mm) |
(mm) |
(mm) |
|
---|---|---|---|---|---|---|---|---|---|---|
Std | 5.1 | 5.3 | 400 | 0.6 | 36.0 | 20-30 | 725 | 1830 | 2100 | 660 |
A | 4.9 | 7.2 | 400 | 0.6 | 36.0 | 20-30 | 795 | 1830 | 2100 | 660 |
B | 4.8 | 9.2 | 400 | 0.6 | 36.0 | 20-30 | 860 | 1845 | 2100 | 660 |
C | 4.6 | 11.1 | 400 | 0.6 | 36.0 | 20-30 | 920 | 1885 | 2115 | 660 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Brochures
You are currently on the PALFINGER United States page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?