Heavy

PK 580 TEC

  1. Go back
  2. Home
  3. Products
  4. PK 580 TEC

PK 580 TEC

Loader Crane
  • More intelligent operation with PALTRONIC 180 control electronics
  • Extra smooth control thanks to LX-6 control valve
  • Very stiff and light boom system thanks to P-Profile
  • More efficient and faster due to continuous slewing system
  • High user friendliness due to in-house developed radio remote control PALcom P7
  • More efficiency with fly jib due to DPS-C
  • Maximum utilisation of the working range thanks to extended HPSC
  • More lifting power due to S-HPLS
  • Practical and attractive due to Functional Design
Downloads Technical Data Send request

P-Fold

P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.

Details

P-Profile

The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.

Details
Max. lifting moment 55.5 mt
Max. lifting capacity 20000 kg
Max. hydraulic outreach 21.2 m
Slewing angle ∞
Slewing torque with 2 gears 5.9 mt
Stabilizer spread (std) 7.8m
Fitting space required (std) 1.43 m
Width folded 2.55 m
Max. operating pressure 385 bar
Pump capacity 90 - 120 l/min
Dead weight (std) 4670 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
54.7 7.9 ∞ 5.9 38.5 90-120 4670 2460 2550 1440
53.1 9.9 ∞ 5.9 38.5 90-120 4950 2460 2550 1440
52.3 12.0 ∞ 5.9 38.5 90-120 5200 2460 2550 1440
51.5 14.3 ∞ 5.9 38.5 90-120 5470 2460 2550 1440
50.7 16.6 ∞ 5.9 38.5 90-120 5720 2460 2550 1525
50.1 18.9 ∞ 5.9 38.5 90-120 5950 2460 2550 1525
49.6 21.2 ∞ 5.9 38.5 90-120 6100 2460 2550 1525

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 580 TEC

2 MB Download

CRANE TOOLS

18,4 MB Download