Medium

PK 295 TEC

  1. Go back
  2. Home
  3. Products
  4. PK 295 TEC

PK 295 TEC

Loader Crane
  • More intelligent operation with PALTRONIC 180 control electronics
  • Very stiff and light boom system thanks to P-Profile
  • High user friendliness due to in-house developed radio remote control PALcom P7
  • More efficiency with fly jib due to DPS-C
  • Maximum utilisation of the working range thanks to extended HPSC
  • More lifting power due to S-HPLS
  • Practical and aesthetic due to Functional Design
Downloads Technical Data

P-Profile

The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.

Details

P-Fold

P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.

Details
Max. lifting moment 28.1 mt
Max. lifting capacity 10000 kg
Max. hydraulic outreach 21.8 m
Max. outreach (with fly jib) 29.9 m
Slewing angle 408°
Slewing torque 3.0 mt
Stabilizer spread (std) 5.6 m
Fitting space required (std) 1.25 m
Width folded 2.55 m
Max. operating pressure 385 bar
Pump capacity 90 -110 l/min
Dead weight (std) 2700 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
27.3 8.1 408 3.0 38.5 90-110 2700 2460 2550 1130
26.8 10.3 408 3.0 38.5 90-110 2870 2460 2550 1130
26.2 12.5 408 3.0 38.5 90-110 3040 2460 2550 1130
25.5 14.7 408 3.0 38.5 90-110 3260 2460 2550 1130
25.0 17.1 408 3.0 38.5 90-110 3420 2460 2550 1130
24.6 19.5 408 3.0 38.5 90-110 3550 2460 2550 1245
24.2 21.8 408 3.0 38.0 90-110 3650 2460 2550 1245

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 295 TEC

1,58 MB Download

CRANE TOOLS

18,4 MB Download