Single

PHT 12

  1. Go back
  2. Home
  3. Products
  4. Hooklifts
  5. Models
  6. PHT 12

Single Axle

Hooklift
Imperial Metric
Hook Height 36 ¼"
Container Length 10 – 14 ft
Min GVWR 17,500 lbs.
Technical Data

This model features a telescoping (36 1/4") jib and dual main cylinders.

12,000 lbs. capacity

Downloads
Lift / DumpCapacity (lb.) CA Range (in.) Optimum CA (in.) Min. GVWR (lb.) Min RBM (in. lb.) Hooklift length Clear Frame Rail (in.) Body Length Range (ft.) Optimum Body Lenghts (ft.) Jib Height (in.) Jib Action Max. Dump Angle Pivot # of Lift / Dump Cylinders Operating Pressure (PSI) Pump Type Fitting Hoses Shipping Weight (lb.) Paint Construction
12000 108-120" 120 17500 N/A 145 150 11-14' 12-14' 36.25'' Telescopic 48 degrees Dual 2/2 4100 Piston - Direct mount JIC/SAE 1320 Primer A514(T-1_
12000 84-96" 96 17500 N/A 130 135 10-12' 10-12' 36.25" Telescopic 52 degrees Dual 2/2 4100 Piston - Direct mount JIC/SAE 1280 Primer A514(T-1)
Lift / DumpCapacity (lb.) CA Range (in.) Optimum CA (in.) Min. GVWR (lb.) Min RBM (in. lb.) Hooklift length Clear Frame Rail (in.) Body Length Range (ft.) Optimum Body Lenghts (ft.) Jib Height (in.) Jib Action Max. Dump Angle Pivot # of Lift / Dump Cylinders Operating Pressure (PSI) Pump Type Fitting Hoses Shipping Weight (lb.) Paint Construction
5443 108-120" 120 17500 N/A 368 381 3.35-4.27 m 3.66-4.27 m 92.07 cm Telescopic 48 degrees Dual 2/2 282 Piston - Direct mount JIC/SAE 599 Primer A514(T-1)
5443 84-96" 96 17500 N/A 330 343 3.05-3.66 m 3.05-3.66 m 92.07 cm Telescopic 52 degrees Dual 2/2 282 Piston - Direct mount JIC/SAE 581 Primer A514(T-1)
  • Dual Pivot Design
    • Flexible design with true dumping capabilities
  • High Pressure Hydraulics (3,600 psi to 4,500 psi)
    • Allows system to take advantage of smaller cylinders, sving you weight and increases your available payload.
  • Container Hold Downs
    • Inside on T-12, PHT-16, and T-20 models
    • Outside on all other models
      • Adjustable (forward and back) on PHT-22
  • Dual Lift/Dump Cylinders
    • Steady and secure handling of bodies during loading, unloading and dumping operations
  • Dual Counter Balance Valves
    • Safety feature providing power up and power down
    • Accessible and serviceable
  • Dual Rear Rollers standard on T-40 models and up
  • Soft Stop Landing standard on T-29 and up
  • Telescopic jib
  • High strength steel supports
    • No wearable/replaceable pads
  • Adjustable Height Jib
    • Hydraulic optional on T-29S, T29-M - 36" and 54"
    • Manual standard on T-40 and up - 54" and 62"
  • Inside Controls
  • Greasable with bronze bushings at all pviot points
  • High strength steel frame - Z rail design
  • Safety sensors
    • Jib sensor ensures the jib cannot retract while in dump mode (all models)
    • Dump latch sensor ensures the latches are fully engated (all models)
    • Soft stop sensor ensures gentle landing of body after dumping (T-29 and up)
  • 3-Year Limited Warranty