Light

PK 5.001 SLD 3

  1. الرجوع إلى الخلف
  2. الصفحة الرئيسية
  3. PK 5.001 SLD 3

PK 5.001 SLD 3

Loader Crane
THE CRANE GEOMETRY IS SIGNIFICANTLY IMPROVED DUE TO THE LINKAGE SYSTEM
  • More power in the hook due to Single Link 
  • Maximum reliability due to PALTRONIC 
  • Shorter load cycle times due to High Speed Extention 
  • Maximum utilisation of the working range due to HPSC
تنزيلات بيانات فنية

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

التفاصيل

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link

The knuckle joint significantly improves the crane’s motion geometry. 

Max. lifting moment 4.6 طن متري
Max. lifting capacity 3300 كجم
Max. hydraulic outreach 11.1 م
Max. manual outreach 12.7 م
Slewing angle 400°
Slewing torque 0.6 طن متري
Stabilizer spread (std) 2.9 m
Fitting space required (std) 0.66 م
Width folded 2.10 م
Max. operating pressure 330 بار
Pump capacity 15 - 25 l/min
Dead weight (std) 695 كجم

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
4.6 5.3 400 0.6 33.0 15-25 695 1830 2100 660
4.4 7.2 400 0.6 33.0 15-25 765 1830 2100 660
4.3 9.2 400 0.6 33.0 15-25 830 1845 2100 660
4.1 11.1 400 0.6 33.0 15-25 890 1885 2115 660

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

تنزيلات

الكتيبات

PK 5.001 SLD 1 / PK 5.001 SLD 3 / PK 5.501 SLD 5

2,52 MB تنزيل

CRANE TOOLS

18,4 MB تنزيل