Medium

PK 21.501 SLD 3

  1. الرجوع إلى الخلف
  2. الصفحة الرئيسية
  3. PK 21.501 SLD 3

PK 21.501 SLD 3

Loader Crane
  • Maximum reliability due to PALTRONIC
  • High operator friendliness thanks to optional radio remote control
  • Shorter load cycle times due to High Speed extension
تنزيلات بيانات فنية

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

التفاصيل

Single Link Plus

The knuckle joint on the crane's knuckle boom improves the crane's lifting power significantly in typical working positions. This knuckle boom, which has been specially developed by PALFINGER and can be angled upwards, also stands out by virtue of excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.

Max. lifting moment 20.9 طن متري
Max. lifting capacity 6200 كجم
Max. hydraulic outreach 14.9 م
Max. manual outreach 19.1 م
Slewing angle 400°
Slewing torque 2.3 طن متري
Stabilizer spread (std) 5.0 m
Width folded 2.50 م
Max. operating pressure 330 بار
Pump capacity 45 - 60 l/min
Dead weight (std) 2260 كجم

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
20.5 8.2 400 2.3 33.0 45-60 2250 2310 2550 905
20.0 10.0 400 2.3 33.0 45-60 2410 2310 2550 905
19.6 12.6 400 2.3 33.0 65-90 2540 2310 2550 975
19.3 14.9 400 2.3 33.0 45-60 2640 2310 2550 975

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

تنزيلات

الكتيبات

PK 21.501 SLD 1 | PK 24.001 SLD 5 | PK 21.501 SLD 3

1,7 MB تنزيل

CRANE TOOLS

18,4 MB تنزيل