Medium

PK 13.501 SLD 1

  1. الرجوع إلى الخلف
  2. الصفحة الرئيسية
  3. PK 13.501 SLD 1

PK 13.501 SLD 1

Loader Crane

WELL-ENGINEERED HYDRAULIC- AND ELECTRONIC SYSTEMS

  • More power in the hook due to Single Link Plus
  • Higher payloads due to intelligent lightweight design
  • Shorter load cycle times due to High Speed Extention
تنزيلات بيانات فنية

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link Plus

The knuckle joint on the crane's knuckle boom improves the crane's lifting power significantly in typical working positions. This knuckle boom, which has been specially developed by PALFINGER and can be angled upwards, also stands out by virtue of excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.

Max. lifting moment 13.1 طن متري
Max. lifting capacity 6200 كجم
Max. hydraulic outreach 14.8 م
Max. manual outreach 19.0 م
Slewing angle 420°
Slewing torque 1.6 طن متري
Stabilizer spread (std) 5.0 m
Fitting space required (std) 0.74 م
Width folded 2.50 م
Max. operating pressure 330 بار
Pump capacity 35 - 50 l/min
Dead weight (std) 1510 كجم

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
13.1 6.1 420 1.6 33.0 35-50 - 2215 2500 740
12.7 8.2 420 1.6 33.0 35-50 1660 2215 2500 740
12.3 10.4 420 1.6 33.0 35-50 1780 2215 2500 740
12.0 12.6 420 1.6 33.0 35-50 1880 2215 2500 740
11.7 14.8 420 1.6 33.0 35-50 1980 2215 2500 800

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

تنزيلات

الكتيبات

PK 13.501 SLD 1 | PK 14.001 SLD 3 PK 13.501 SLD 3 | PK 14.501 SLD 5

4,06 MB تنزيل