Medium

PK 12.501 SLD 5

  1. الرجوع إلى الخلف
  2. الصفحة الرئيسية
  3. PK 12.501 SLD 5

PK 12.501 SLD 5

Loader Crane

SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING

  • More power on the hook due to Single Link
  • Higher payloads due to intelligent lightweight design
  • Maximum reliability due to PALTRONIC
  • High degree of user-friendliness thanks to optional radio remote control
  • More lifting power due to A-HPLS
تنزيلات بيانات فنية

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

التفاصيل

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

التفاصيل

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link

The knuckle joint significantly improves the crane’s motion geometry. 

Max. lifting moment 11.4 طن متري
Max. lifting capacity 5700 كجم
Max. hydraulic outreach 12.0 م
Max. manual outreach 15.9 م
Slewing angle 400°
Slewing torque 1.3 طن متري
Stabilizer spread (std) 3.3 m
Fitting space required (std) 0.72 م
Max. operating pressure 360 بار
Pump capacity 45 - 60 l/min
Dead weight (std) 1170 كجم

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
11.4 5.8 400 1.3 36.0 45-60 1170 2110 2400 720
11.1 7.8 400 1.3 36.0 45-60 1280 2110 2400 720
10.8 9.9 400 1.3 36.0 45-60 1380 2110 2400 720
10.5 12.0 400 1.3 36.0 45-60 1480 2110 2400 720

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

تنزيلات

الكتيبات

PK 11.001 SLD 1 / PK 12.001 SLD 3 / PK 11.001 SLD 3 / PK 12.501 SLD 5

3,36 MB تنزيل

CRANE TOOLS

18,4 MB تنزيل